金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Introduction of energy saving of new bending machine

Introduction of energy saving of new bending machine

Intermediate frequency bend machine mainly include alloy core head, intermediate frequency coil bracket, intermediate frequency coil, export support, pushed the door open, hydraulic cylinder, after pushing plate, gate, hydraulic lift cylinder, the main oil cylinder, cylinder bracket, after feeding the core rod, the big chassis, oil cylinder, motor, axial plunger pump, integrated block (which installation of the hydraulic control valve), etc

Medium frequency elbow machine itself is a non-standard product, so there is no specific specifications, we can directly customize according to customer requirements.

Medium frequency heating elbow machine is mainly used for carbon steel and alloy steel elbow forming, if you need stainless steel elbow products please choose cold push elbow machine.

Elbow machine: can push 21mm-1620mm, wall thickness 5mm-100mm, Angle 22.5° 45° 90° 135° 180° and other user demand Angle seamless steel pipe elbow.

New intermediate frequency: new intermediate frequency can save 30% electricity than similar products, easy to operate, low failure rate, high efficiency. And no noise. That's the new energy saver.

Heating power supply part of elbow machine -- constant power output. The adopted voltage stabilizing technology can keep the output power of intermediate frequency stable even if the incoming voltage fluctuates 10%. Energy saving health, low noise, low pollution. Elbow machine adopts hydraulic automatic feeding structure. Elbow gate adopts hydraulic opening and closing. Bend machine coil bracket up and down, back and forth, swing by motor adjustment, smooth operation. Elbow machine according to the equipment needs to use two or four cylinders push system, the equipment runs more smoothly. Select the main push pump according to the push elbow, select the speed of feeding, the mandrel heated to the working temperature began to advance, the speed of the work is adjustable, push to the midpoint of the push machine to stop automatically, hydraulic gate brake dead, the core rod feeding, release the gate back to the end, the gate gate to the rod diameter began to advance. Note: main push pump can be used at the same time, generally only one can be used. Can also be used to retreat without stopping. Backward pump can not be used at the same time, only one can be started, the other standby. Feeding pump can only be used for feeding. The stable pressure of the hydraulic system of the main oil pump and the hydraulic system of the auxiliary cylinder shall be set as. Both ends of the stroke of the push machine are equipped with a stroke switch, the actual stroke should be less than the large stroke, that is, the front and rear ends of the active push plate.

Cangzhou Aiguang machinery equipment Co., Ltd. not only produces elbow machine, but also produces pipe bending machine, tee machine, pipe expanding machine, press machine, beveling machine and other mechanical equipment and supporting molds.