金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow machine is divided into several installation methods

Elbow machine is divided into several installation methods

Installation :1. Pull out elbow machine clamping die fixed mandrel. 2. Put the clamping die into the elbow machine, and then insert the fixed mandrel.

Adjustment :1. Fix and relax the clamping die base of the pipe bender, then put the control panel into manual mode and press the clamping button until the clamping die is over. (At this time, the gap between the wheel die clamping die needs to be adjusted, clamping die seat can be adjusted by adjusting screws.

2. Adjust the clamping die seat adjusting screw, make the clamping die and wheel die completely tight.

3. Press the back button to make the clamping die back, and then rotate the clamping die adjusting screw clockwise about 1/2-1/4 turns.

4. Lock the clamping die seat fixing nut.

What are the functions of the elbow machine?

Elbow machine host, hydraulic pump station, console, motor control cabinet, IF power supply, compensation capacitor, water cable, IF coil regulating frame, reactor. Working principle of the equipment: put the cutting raw material on the core rod of the elbow mold, put the IF induction coil on the core end of the elbow mold, start the cooling pump and IF power supply, heat the raw material to about 800°C, and then start the push machine to push the bending.

The working principle of elbow machine is introduced:

Put the cut raw material on the core rod of the elbow mold, put the IF induction coil on the core end of the elbow mold, start the cooling pump and IF power supply, heat the raw material to about 800°C, and then start the push machine to push the bending.

The elbow machine is made of seamless steel pipe, welded steel pipe or spiral pipe as raw material, using intermediate frequency heating, adjustable power and frequency, to ensure the appropriate ditherability height, to ensure the product material performance stability, intermediate frequency power factor of 0.95 or more, energy saving, novel equipment, compact structure, automatic operation, high production efficiency. Using hydraulic cylinder to push raw materials, strong thrust, continuously variable speed, automatic control, can greatly save manpower and material resources, with low construction investment, high yield, raw material specifications and strong applicability.

Introduction to the operation procedures of the elbow machine: select the main push pump of the elbow pipe fitting of the push machine according to the requirements of the customer, feed the speed selected by the push elbow, heat the gate mandlet to the working temperature and start pushing, adjust the push speed during working, push the machine automatically stops when it reaches the midpoint, lock the mandlet of the hydraulic gate, feed the machine, release the gate and step back to the end, the gate outer diameter of 5mm and start pushing everywhere.