金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Medium frequency pipe bending machine with simple operation

The simple medium frequency pipe bender is a common metal working equipment used to bend metal pipes into the desired shape. It is mainly composed of frame, hydraulic system, control system and bending mold. The following will detail the operation steps of the medium frequency pipe bender, as well as precautions and common troubleshooting methods.

First, operation steps:

1. Preparation: Confirm that the power supply and hydraulic system of the machine are in normal working condition, and check whether the various parts of the pipe bender are intact.

2. Adjust the mold: Select the appropriate mold according to the size of the pipe that needs to be bent, and install it on the pipe bender. Ensure that the mold is firmly installed and will not loose.

3. Set parameters: According to the diameter, thickness and bending Angle of the pipe, set the corresponding parameters through the control system. These parameters may include bending Angle, bending speed, bending force, etc.

4. Place the pipe: Place the pipe to be bent into the clamping device of the pipe bender to ensure the correct and stable position of the pipe.

5. Start bending: Start the bending machine and press the start button. The machine will drive the hydraulic system to perform bending operation according to the parameters set. During the bending process, you can observe the display on the workbench to understand the current working status.

6. Observe the bending process: During the bending process, observe the bending of the pipe in time to ensure that the bending Angle and shape meet the requirements. If any exception is found, stop the operation and check it in time.

7. Complete bending: When the pipe has completed the required bending, stop the operation of the machine and take out the bent pipe.

8. Cleaning and maintenance: After the operation is completed, all parts of the pipe bender should be cleaned in time, especially the mold and the clamping device. The regular machine is always running.

Ii. Precautions:

1. In the operation, pay attention to safety, avoid hands or other body parts close to the working parts of the pipe bending machine, so as to avoid accidental injury.

2. The operator should be familiar with the use method and operation process of the pipe bender, and operate in strict accordance with the operating rules to avoid equipment damage or accidents caused by operation errors.

3. Before operation, carefully check the quality of the pipe to ensure that it meets the requirements. If there is any problem, it should be replaced or repaired in time.

4. When setting parameters, it is necessary to adjust according to the specific situation to ensure the accuracy and quality of the bending effect.

Three, common troubleshooting methods:

1. If the pipe bender cannot be started, first check the electrical connection and check whether the fault indicator is on. If yes, follow the light to troubleshoot.

2. If the pipe cannot be clamped or is not stable, check whether the clamping device is loose or damaged and needs to be repaired or replaced.

3. If the bending degree is not accurate or the shape does not meet the requirements, the parameter setting may be incorrect. You can adjust the operation according to the actual situation.

4. If abnormal sound or vibration occurs during the operation of the pipe bender, the operation should be stopped in time and the various parts of the machine should be checked for faults or looseness.

Summary: The simple operation of the medium frequency pipe bending machine is a very useful metal processing equipment, just follow the correct operating steps to operate, you can easily achieve the bending of the gold pipe. Pay attention to safety in the operation, and regular maintenance to extend the service life of the equipment

For more information about medium frequency pipe bending machine, please pay attention to our website:http://www.xhxhhsl.com/