金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The induction and operation function of medium frequency pip

The induction and operation function of medium frequency pipe bender  

The intermediate frequency pipe bender is a kind of pipe bending tool with the function of pipe bending and jacking. The intermediate frequency pipe bender has many advantages such as reasonable structure, stable use, convenient operation, reasonable price, quick loading and unloading, and one machine multi-purpose.  Medium frequency pipe bender occupies a large share in the domestic pipe bender market.  

The induction of the intermediate frequency pipe bender is that the cooling water supply is forbidden to stop when the induction tube is bent in the process of transformer operation. The water channel should be back and forth in the system to prevent water from splashing on the transformer.  

The winding tube should be carefully adjusted before and after the torsion, so that the middle of the chuck and the induction coil in the middle of the same, the support of the supporting wheel on the workpiece should be adjusted to the appropriate height, so that the workpiece is smooth, in the same plane of the tube and straight section of the torsion and rotation.  

Before the operation of the intermediate frequency pipe bender, prepare the intermediate frequency pipe bender and open the intermediate frequency pipe bender according to the requirements of the intermediate frequency power supply and the intermediate frequency transformer;  Open the cooling pump and the cooling water of the workpiece of the intermediate frequency pipe bender, and the temperature of the inner wall should be kept at least at a certain temperature until the temperature of the pipe can be twisted.  

But in the process of this pipeline is not high, to ensure high heating temperature, can open the main motor winding operation;  Do not heat to the winding temperature or workpiece without heating, do not open the main motor.  After torsion and rotation, stop heating, do not loosen the chuck, and do not open the main motor for reverse operation of the rotary arm.  

2340