金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The basic function of the three-way machine

The basic function of the three-way machine

The main characteristics of three-way machine are: three-way machine with semi-automatic, automatic two modes of operation. The electrical control system of the three-way machine is controlled by PLC. Automatic decompression, exhaust and other functions.

Three-way machine operating conditions: working environment temperature 0-40°C, power supply: three-phase four-wire system 50HZ,380V±10%. Hydraulic system of three-way machine :YB-N46 anti-wear hydraulic oil.

The tee machine is suitable for 21-630 stainless steel and carbon steel tee fittings.

The three-way machine is equipped with an independent electrical control cabinet, and the main operation button station is suspended on the body.

The hydraulic power structure of the three-way machine is installed above the fuselage. It is composed of oil pump, motor, cartridge valve integration block, oil tank and so on. The power structure includes oil filtration, cooling, oil temperature and oil level display and other devices. The main oil pump is a plunger pump with constant power input, and the output flow can change with the pressure.

Electrical control system of the three-way machine: The three-way machine is equipped with an independent electrical control cabinet, and the main operation button station is suspended on the fuselage. Three-way machine adopts PLC controller. The three-way electrical power supply is AC380V, the 50HZ control power supply is AC220V, and the solenoid power supply of each valve is DC24V.

Three way machine can produce material is carbon steel, alloy steel, stainless steel, copper and so on.

Tee machine is how to produce tee pipe fittings: tee machine technology is pushed the straight tube with water into tee, reduce lead, lead blank, drilling, retreat lead process, save cost and production time, in order to guarantee the stability of water pressure, we use transformer to stability of equilibrium in copper pipe extrusion tee water pressure, make the copper tube in the extrusion process maintain a constant pressure; Both sides of the cylinder to adjust the synchronization performance, we also use a synchronizer to make both sides of the cylinder synchronization, so as to achieve a higher yield (can process the diameter of 7 mm copper pipe, pass rate of more than 98%, molding cycle about 10 seconds/time). Tee machine mainly produces carbon steel, stainless steel, alloy steel and other materials of tee pipe fittings. 90 degree and 135 degree tees can be manufactured. The above is how regular three-way machine production of three-way pipe fittings. The three-way machine can produce 21mm-630mm in diameter and 3mm-20mm in wall thickness.