金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Characteristics of steel tube chamfering machine

The company mainly produces chamfering machine, all the purchase of the company's pipe fittings equipment are within 60 days of delivery, a week of installation and commissioning.The electrical connection and protection of the beveling machine should be carried out in accordance with local regulations.One end of the cable is connected with the aviation plug (random accessories), and the other end is connected with the power supply;Do not use the beveling machine in humid environment to avoid danger.

According to the arrow indicating the feed, the tool can be rotated to contact the workpiece.When the hydraulic oil is small, the hydraulic oil can be filled to the hydraulic system through the "oil hole A";If the equipment is not in use for a long time, slowly release the "relief valve F" to make the "hydraulic cylinder H" to the lowest state;When the outlet of "check valve T" leaks oil, the raw material belt can be used to rewind the nozzle to achieve sealing.The above is the company's brief introduction of routine protection and daily maintenance matters.

The beveling machine is widely used in pipeline installation and maintenance in petroleum, chemical, natural gas, electric power, boiler, pharmaceutical and other industries.The above is the routine protection and daily maintenance of the beveling machine to introduce to you here, I hope to bring you some help.The chamfering machine is a special tool for bending the slope of the pipe in the front of the welding. This technology solves the non-standard Angle, rough slope surface, large working noise and other characteristics of the operation process of flame cutting and grinding machine. It has the characteristics of simple operation, standard Angle and smooth surface.No vibration, no heat, no lampblack, no dust.We use standard carbide blades for free cleaning of free edge burrs.By adjusting the cutting depth, the Angle can be adjusted to 15-50°.Easy to operate, self support on the workpiece, including near the pipe groove, low power.Perfect for welding Our bevelers specialize in slow grinding, more efficient than gas cutting bevels.The current global fastest is 3.5 meters per minute.The maximum groove thickness of chamfering machine is 12mm, and the thickness of cutting material is 6-30mm. The bevel out of chamfering machine can be used for welding without any processing. All circuit equipment is installed in dust-free box, and the machine can be operated safely.