金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Specification for operation of beveling machine

Specification for operation of beveling machine

1. Seek suitable molds and fix them to the beveling machine according to the pipe fittings needed.

2. Placing and compressing pipe fittings.

3. Move the tool to the right position and move the mold slightly if necessary.

4. Start the machine

5. Slowly feed the tool, so that the tool contact the protruding point of the pipe, not too fast, in order to prevent too fast contact with the tool, resulting in tool damage.

6. Continue to feed slowly until a qualified groove Angle is found.

7. Open and take out pipe fitting.

8. Replace pipe fitting, press tight...

The difference between flaring machine and tube expanding machine

The flaring machine is used for hot flaring of one end or both ends of steel pipe of various specifications (flaring form and size are determined according to user's needs).

Used for anticorrosion pipeline steel tube flaring, steel pipe connection end joint parts can't be embalmed, steel pipe end after flaring, in the period of inner anti-corrosion pipe fittings, with "O" type polyurethane seal ring joint of steel tube joint with pipe corrosive liquid phase segregation, make joint purpose of corrosion protection, make the whole pipeline anti-corrosion steel pipe extended use by 3 ~ 5 times.

One end of the steel pipe used for all kinds of threading anticorrosive steel pipe pipes is flared, and the other end of the steel pipe is inserted into it to connect with each other to form a sealed threading pipe, which is used for embedding in the construction of urban road rules to prepare for the layout and control construction of all kinds of wires, cables and communication lines.At the same time, it is also a special equipment for the end flaring of steel pipe for building fire protection and anti-corrosion pipeline.

The flaring of both ends of the large-caliber steel pipe is formed in the form of internal and external spherical connection, which is easy to bend and weld in the construction of pipeline laying. This flaring form is commonly used in the construction of various large-caliber steel pipe conveying pipeline such as natural gas.

Anticorrosive liquid conveying pipe made by hot flaring unit flaring process will gradually replace casting pipe and cement pipe, the main advantages are easy to install, convenient and quick construction, reduce the cost of the project.

Equipment structure: rack device, main cylinder and the plate, steel tube feeding, steel pipe rack, steel tube center device, steel tube flaring and exit the clamping device, the hydraulic control system, electric control system (work station), intermediate frequency power supply heating equipment, heating coil to adjust frame, induction heating coil, flaring die, cooling circulating water system, etc.

2121-2113.