金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

How to protect the pipe bender after the first use

How to protect the pipe bender after the first use

Pipe bender is a kind of electric equipment, but its very few layouts need to add hydraulic oil.

How to protect the pipe bender after the first use?The following is a detailed introduction for you:

Mechanical oil or hydraulic oil with moving viscosity of 20 should be added in the first use of the pipe bender.The normal use of the oil pump of the pipe bender can give full play to the performance of the oil pump when the pressure is 63MPa. It is reasonable to use and there is no need to adjust everywhere.When the actual working pressure is lower than 63MPa, there is no need to adjust everywhere.

The following matters should be noted when using the pipe bender:

Do not exceed the push system work.Do not arbitrarily move the high and low pressure valve.When working, the handle should be steadily shaken, so that the oil pipeline has impact phenomenon, so that the valves work for a long time.When decompressing, the handwheel should be twisted slowly, and the decompression should not be too fast.When the amount of oil is not enough, oil shall not be injected under pressure, so as to avoid the existence of pressure on the tubing.Tightening direction work at all joints.The high pressure hose is tested once a year to prevent the hose from aging. When the experimental pressure is lower than 90Mpa, the protrusion occurs and the leakage can not be used.

Pipe bender has many functions, reasonable structure, simple operation, easy to move, quick installation and so on.In power and construction, the public railway construction, boiler, Bridges, ships, furniture, decoration and use built pipelines, etc, besides the function of elbow machine, hydraulic bending and use the fuel tank of hydraulic jack, relative to the tube has a low Angle bending device, is advantageous for the leading products in the domestic market position of pipe bender used functions.

2118