金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The analysis of elbow machine manufacturers on elbow machine

The analysis of elbow machine manufacturers on elbow machine

Equipment like this is equipped with an intermediate frequency power supply.The following is a brief introduction to the operation process of the IF power supply.

First, we must first close the low voltage switch box switch on the incoming line, observe the three-phase incoming line voltage, ammeter indication is normal, will adjust the minimum value of the potentiometer modulation.According to control power on twist, 2-3 seconds according to the main circuit connected by twisting, then inverter twist, intermediate frequency power supply start operation, the dc voltmeter, ammeter, frequency tables of intermediate frequency instructions, after the success of the launch, slow tune power knob to the required power azimuth, the input power, if the frequency does not establish (i.e., a failure) inverter stop button to reset,Press the inverter to start again.The above briefly introduces the operation process of the IF power supply.

The elbow machine is divided into medium frequency elbow machine and cold push elbow machine. The medium frequency elbow machine is mainly made of carbon steel, alloy steel, etc.Medium frequency heating elbow machine is mainly used to produce various diameter and wall thickness of elbow pipe fittings with curvature radius of 1-2.5D.With the development of the steel pipe deep adding technology, the product has been improved in all aspects, the equipment has been integrated beyond the stress line cone die diameter expansion, digital control medium frequency induction heating, the application of no back pressure energy consumption hydraulic transmission and other technologies.

Cold push bend machine is mainly the production of material is made of stainless steel pipe fittings, pushing a 90 - degree bend of the special equipment, molding method for side ejector push straight in the main mode of system on the core rod, and is equipped with automatic stripping device, took off from the mandrel, the elbow electrical system adopts PLC control, hydraulic system adopts cartridge valve, convenient maintenance, simple operation, high production efficiency.The above is the analysis of the elbow machine made by the company, hoping to help more users.

2076-2068.