金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow machine debugging and installation completed

Elbow machine debugging and installation completed

Our company has delivered two elbow machines customized by Shanxi Yushe before, and then our engineers and installers will go to install and debug the elbow machines. After the installation and debugging of the elbow machines is completed, then our engineers will instruct their staff how to operate the elbow machines and clean up after work.

Engineers provided customers with installation, commissioning, delivery and maintenance as well as production. Customers were very satisfied. We have customized two beveling machines in our company.

The whole process of elbow machine production

Elbow machine you may have seen, if you do not see can choose to look at the push machine in the website, elbow machine operation is very simple, it is a mandrel or horn, mandrel has fine thickening, pushing process is a process of expanding with bending.There is a support behind the cutting pipe end into the mandrel, behind a memorial arch frame will be fixed mandrel.There is a car in the middle, some of the car through hydraulic transmission, some through mechanical transmission that is, screw transmission, and then push forward the car.The trolley pushes the pipe along the mandre to go forward, and there is an induction ring outside the mandre. Heate the pipe, and then the trolley pushes the pipe down, and then one is processed. After pushing, the elbow should be reshaped in this hot state.Because some elbow improper handling, will be twisted, this is not allowed.In addition, after pushing the head is generally large front diameter, to be reshaped through the shaping mold.Plastic mold is actually a press, to have a set of molds, two semicircular arcs, up and down one.After the shaping of the outer diameter to reach the size of the finished product requirements.The wall thickness is controlled by the wall thickness of incoming material.Elbow and pipe wall thickness tolerance is the same, all is 12.5%, in the process of driving system, under normal circumstances wall thickness should not be changed, but if for tool reason, some local wall reduction happens, so generally refer to material, wall thickness to add some allowance, if the elbow is 8.18 mm wall thickness, pipe of the 8.5 mm or so commonly,Prevent out of tolerance due to local thickness reduction when pushing.After setting the shape, the outer diameter and wall thickness of the elbow are hit the requirements, and the following finishing process is carried out. After sandblasting, the oxide iron sheet on the inner and outer surface of the elbow is removed, and the bevels at both ends are processed so as to facilitate welding.After inspection, typing, painting, packaging and other processes, can be factory.

2016-2014.