金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Pipe bender in transportation and movement and installation

Pipe bender in transportation and movement and installation process need to pay attention to matters

Pipe bender has been widely used in many industries, and each industry has its own characteristics of the pipeline, for example: aerospace pipe bender usually needs high precision, moral flexibility, shipbuilding pipe bender needs particularly large output torque and large specifications of pipe fitting convenient loading and unloading problems.The automotive industry requires a particularly high production tempo and reliability and durability.Before transporting, moving and installing the pipe bender, it is necessary to carefully read the safety precautions for transporting, moving and installing the machine, and strictly implement the provisions in the precautions. Most accidents are caused by human negligence and non-compliance with safety regulations.

Safety precautions for pipe bender transportation and mobile installation should at least include:Pipe bender in transport, lifting, moving, must confirm the machine model in advance and overall dimensions, such as the total weight information, and then choose to bear the weight of the machine wire, hanging pipe bender buckle with the rings, and choose to bear the weight of machine hoisting equipment and handling equipment, pipe bender assembly must be in accordance with the assembly drawing of the instructions,Adequate space must be provided for lifting and erection of the pipe bender.Avoid injuring staff and machine during operation. Personnel unrelated to operation shall not be allowed in the operation area of the pipe bender to avoid injury.

Usage of hydraulic pipe bender:

1, the use of hydraulic pipe bender:

1) Refer to the operation manual of electric oil pump.

(2) first screw the working cylinder into the internal thread of the square block, so that the rear end of the cylinder is mounted on the wheel on the bracket downward.

(3), choose according to bend the pipe by the outer diameter of the die set in column fortress, two roller groove which corresponds to die, and then in the corresponding size of the plate hole, then the cover plate, the curved pipe inserted into the slot, then quick joint activities of high pressure oil pipe end part of the back and set on the joint of working cylinder, electric oil pump on the oil drain screw tightening, can bend.When the bend is finished, loosen the oil drain screw and the plunger will reset automatically.

2. Matters needing attention for hydraulic pipe bender:

(1) Refer to the operation manual of electric oil pump.

(2) do not unload the quick connector when there is a load.

(3) The machine and tools are oil as the medium, do a good job of oil and the machine and maintenance work, to avoid blockage or oil leakage, affect the use effect.

1997-1994.