金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

How to solve the problem of elbow push machine in the produ

How to solve the problem of elbow push machine in the production process

Elbow machine is also called push machine, push machine in the upper skateboard and the positioning shaft are not in the origin of the situation, the operation back to the origin of the program.

Push machine equipment after starting empty operation 1-2 minutes, on the skateboard full travel movement 2-3 times, such as abnormal sound or fault should be parked, the problem will be removed, all normal before the operation.

Pushing machine operation should be under the unified command of one person, so that the operator and the feeding restriction personnel closely cooperate, to ensure that the cooperation personnel are in the safe direction of the announcement of bending signal.It is necessary to compaction the sheet when bending to prevent the sheet from warping and wounding.It is necessary to cut off the power supply when adjusting the sheet material pressing die and stop the operation.When changing the opening of the variable lower die, no material is allowed to contact the lower die.

When the machine is working, the back of the machine is not allowed to stand.Prevent pressing and folding sheet material at one end alone.Work found that the workpiece or mold is not correct, should park proofreading, stop the work with hand proofreading to prevent hand injury.To avoid damage to the machine tool, it is necessary to prevent the folding of super-thick iron plate, quenched steel plate, high-grade alloy steel, square steel and the sheet material beyond the performance of the sheet bending machine.Frequently check the coincidence degree of upper and lower molds;Is the indication of the pressure gauge in accordance with the regulations?Abnormal immediately shut down, check the reason and timely cleaning.Before turning off the elbow, wooden blocks should be placed on the lower die under the two sides of the oil cylinder to lower the upper slide onto the wooden blocks.Exit the control system program first, and then cut off the power supply.

This paper briefly introduces the elbow machine and its technical parameters

Elbow machine is mainly a special equipment for the production of elbow, can produce 21-1620mm, wall thickness of 3-120mm, multiple of more than 1D carbon steel, alloy steel elbow.

Hot push elbow forming process using special elbow machine, core rod core and heating device.

The elbow produced by the elbow machine has beautiful appearance, uniform wall thickness and continuous production.Mainly can mass production, and mainly push the carbon steel, alloy steel material.If you need to produce stainless steel elbow, choose the cold push elbow machine produced by our company.

The main power of elbow machine is hydraulic cylinder, strong thrust, automatic control, can greatly save manpower and material resources, with low construction investment, high rate of finished materials, specifications and strong applicability of raw materials and other advantages.Welcome new and old customers to visit.

1911-1904.