金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The working principle of structural machine of elbow push ma

The working principle of structural machine of elbow push machine

The mould of elbow pushing machine and medium frequency induction heating coil are customized according to the products produced by customers.

Place the prepared raw material pipe sleeve at the mold core, add the intermediate frequency induction and hot wire trap at the end of the steel pipe and the mold core to push the elbow, turn on the cooling water pump, turn on the intermediate frequency power to heat the raw material pipe to about 800°, turn on the pushing machine, and then start pushing the elbow.Intermediate frequency power supply, intermediate frequency induction heating coil, compensation capacitor, water cable, reactor and other components need circulating water cooling.

The structure of the elbow push machine is in accordance with the outer diameter and wall thickness of the production required by users, and the elbow push machine is set with the power of the medium frequency heating power supply, the diameter and shape of the cylinder, and the number of cylinders.

Elbow pushing machine factory supporting: elbow pushing machine, hydraulic pump station, medium frequency power supply, motor control cabinet, operation table, compensation resonant capacitor cabinet, water cable, reactor and other components.

Intermediate frequency elbow machine in the operation of the need to pay attention to the process and provisions

Medium frequency elbow machine in the production of elbow is and press, beveling machine and other mechanical equipment with the use of beautiful elbow, the above several pipe fittings equipment it has some operating provisions need customers to pay attention to.

Operators of intermediate frequency elbow machine should be familiar with the operation method of elbow machine and the performance of elbow machine to avoid accidents.

Operators need to wear appropriate protective clothing when operating the above pipe fitting equipment.

Before using the intermediate frequency elbow machine, check the various parts of the elbow machine and whether the parts are firm.

All parts of the intermediate frequency elbow machine should be kept clean.

The medium frequency elbow machine can not place any items on the machine before use, so as not to damage the machine during operation.It brings trouble to the operators.

If any abnormality is found during the use of intermediate frequency elbow machine, it is necessary to stop immediately.

All in the company to buy all pipe fittings equipment after use, to tidy up the machine.Put all the fittings on the pipe fitting equipment back to the original place after use.The above is for you to briefly introduce the intermediate frequency elbow machine in the use of the need to pay attention to the points.

1870-1866.