金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow push machine

Intermediate frequency elbow machine

What is the medium frequency elbow machine composed of?

It includes:Strip base (1), cylinder (2), cylinder bracket (3), rear baffle (4), push plate (5), front baffle (6), etc., in the front baffle (6) and the rear baffle (4) between the center of the hole connected with a guide pipe (7), in the front baffle (6) inside, is provided with a roller box (8),The outer side of the front baffle plate (6) is vertically fixedly connected with a rocker arm base (9), the rocker arm base (9) is provided with a movable axis (10), the movable axis (10) is connected with a rocker arm (11) with an adjustable length, and the front end of the rocker arm (11) is connected with a chuck (12) relative to the center hole.

The intermediate frequency elbow machine is a pipe fitting processing equipment which can not only bend the pipe fittings but also push and make the elbow. It is convenient to operate and reduces the cost

Elbow push machine

How to use elbow push machine?

According to the first bend specification, billet, billet collected set in the specifications elbow push system of special orientation on the mandrel, and then use mandrel of induction coil to heat pipe die head, when heated to a specified temperature in the axial thrust and under the guidance of mandrel tube billet gradually produce radial expansion and axial bending deformation,The smaller diameter tube billet is formed and pushed into the larger diameter elbow.

1800-1791.