金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The structure and control system scope of beveling machine a

The structure and control system scope of beveling machine are introduced  

Beveling machine this machine is suitable for power station, petroleum, chemical industry, shipbuilding and other industries of pipe fitting manufacturing, pipeline installation units;  It is the key equipment for pipe fitting manufacture and pipe end bevel processing before welding.  

The machine can be made up of different fixtures, can process φ820-φ1020 straight pipe and elbow pipe end groove;  The cutter head is equipped with an Angle tool rest which can process the middle and high pressure pipelines with wall thickness greater than 14 mm, and the floating tool rest which can process the low pressure pipelines with wall thickness less than 16 mm and lost in 5 mm;  Angle tool rest adjusts position according to different pipe diameter and is driven by differential structure for cutting;  The clamping device adopts platform structure and flexible clamping device, which can enlarge the machining range and reduce the deformation of pipe fittings.  The alignment of pipe fittings adopts manual movement of power head left and right and electric lifting method of fixture platform up and down.  Electrical use in the operation box centralized operation of machine movements, convenient and reliable.  

The machine consists of power head, cutter head structure, bed structure, fixture platform structure, electrical control system and other five components.  

1, beveling machine power head  

The power head output six spindle speed and three kinds of differential tool rest feed speed by the motor through the gear change;  The tail is also equipped with a tool rest electric fast advance and retreat structure, which can be used alone or together with the differential feed.  

2, beveling machine cutter head structure  

The Angle tool rest can be installed on the tool head. The corresponding position of the tool rest should be adjusted according to the diameter of the machining pipe before cutting. The Angle tool rest is driven by differential speed for cutting.  

3. Body structure of beveling machine tool  

The bed body is installed with electric longitudinal feed structure, manual transverse adjustment and cutting structure, bed body and drag board components, electric longitudinal feed has two speeds of fast and work, the two speeds can work alone or at the same time in the same direction or reverse together.  

4, beveling machine fixture platform structure  

The fixture seat frame is installed on the platform and the electric lifting structure, the platform has vertical and horizontal T-groove for the installation of pipe support and flexible clamping structure.  

5. Bevel mechanical and electrical gas control system  

The electrical components are installed in the common electrical box, the operating components are installed in the suspension type control box, machine movements can be operated on the control box