金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Bending load force of pipe bender

Bending load force of pipe bender  

When the intermediate frequency pipe bender twists and turns, the duct is pulled forward by the tube because the trolley is used as the load. In order to innovate the twists and turns, the tube twists and turns have some extreme wall thickness thinning, reduce rebound, and increase the boost equipment.  When zigzagging, the die not only compresses the pipe, but is also pushed forward by auxiliary thrust to form a side thrust to assist bending.  The elbow arm is connected with the tortuous spindle, the elbow bending shaft can be exchanged, and the clamping die is moved up and down. The wind pipe elbow machine not only has a fair structure, but also increases the strength of the machine, and the structure is broad, so that the electrical circuit is simplified.  

Correct manipulation of intermediate frequency pipe bender can probably ensure the operator's personal tranquility, and is very conducive to extending the service life of pipe bender.  The elbow not only prevents the car from colliding with the press die, ensuring the smooth completion of a bend, but also can reduce the material head clamping loss and production cost.  

Intermediate frequency pipe bender can bend small radius pipe, and can simmer large caliber steel pipe, can simmer radius steel pipe, square steel, Angle iron, channel steel, I-steel and other profiles, used for building, bridge and other industries.  The intermediate frequency pipe bender is one of the bending equipment which can not be used in the industry.  

Medium frequency pipe bending machine and cold pipe bending machine have their own advantages and disadvantages. Medium frequency pipe bending machine is important for simmering pipe with large diameter and large wall thickness, while cold pipe bending machine is important for simmering pipe with small diameter and small wall thickness.