金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Suction pipe of intermediate frequency pipe bender can not l

Suction pipe of intermediate frequency pipe bender can not leak air  

The working principle and process of the oil pipe part of the intermediate frequency pipe bender, the working principle of the intermediate frequency pipe bender is the hydraulic oil output by the electric oil pump, which is sent into the working cylinder through the high-pressure oil pipe. The hydraulic oil urges the plunger in the working cylinder, and the thrust is carried out through the process of the bending pipe parts.  Intermediate frequency pipe bender can be selected according to the pressure and operating occasions, tubing needs sufficient strength, the inner wall should be smooth, clean pipeline line requirements short, turn and need little, the less the better, and the installation of exhaust device, so as to start air.  The oil pipe of the elbow requires that the suction pipe can not leak, nor can there be too much morning resistance to maintain the smooth degree of air intake or oil absorption.  Welcome new and old customers to our company, our company will answer for you in detail.  

Intermediate frequency pipe bending machine The material used for bending steel pipe: seamless steel pipe, straight seam welding pipe or spiral welding pipe.  The bending radius of the elbow must be greater than 2.5D, and below 2.5D is manufactured by elbow push technology. The elbow Angle is controlled by programming in the intermediate frequency pipe bender, and the elbow Angle is set arbitrarily according to needs within a certain range.  Intermediate frequency pipe bender in the push bending pipe diameter and wall thickness range of diameter 21mm-1620mm, wall thickness from 3mm-100mm, intermediate frequency pipe bender main cylinder stroke according to the large diameter and bending radius (customer provided).