金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Bend machine can produce all kinds of bend pipe fittings at

Bend machine can produce all kinds of bend pipe fittings at different angles  

Aoguang pipe fitting equipment manufacturing co., Ltd. is a manufacturer of pipe fitting equipment for customers, such as "elbow machine, pipe bending machine, tee machine, pipe expanding machine, press, beveling machine, straight seam welding pipe production line and more pipe fitting equipment molds.  Our company provides quality assurance, low price, customer satisfaction approved pipe fitting equipment."  

Elbow machine in our company to produce many years of experience on our company to improve the automation of elbow machine, I noise production process, according to the structure of elbow machine, elbow machine can meet the bending of different angles of elbow pipe, can produce a variety of seamless and straight seam pipe fittings.  The elbow fittings of the production department can be produced in batches for each customer to order the elbow fittings.  It is also the advantage that customers use elbow machine to produce elbow pipe fittings.  

The power of the elbow machine is different and the size of the oil cylinder is different. Our company generally orders the drive of the oil cylinder according to the size of the elbow machine. In the process of bending, the hydraulic transmission system actively saves the cache, further improves the accuracy of the bending Angle, fast standard, and saves the cache of the whole process of regression.  

Before stamping, the elbow machine puts the tube blank on the upper die, loads the shell and end die into the pipe, and generates the elbow pipe fittings according to the restrictions of the outer die and the support of the mandrel.  Under the action of intermediate frequency power supply and heating coil, the tube blank is heated to the required temperature and pushed to produce different Angle elbow pipe fittings ordered by customers.  Elbow machine can produce push machine wall thickness and material is mainly based on customer requirements to order elbow machine.  Due to its suitability for parts manufacturing and low cost, stamping elbow technology is suitable for small batch production of thin-wall elbow.  

Put the pipe into the outer model, choose the elbow machine, is the whole process of hot forging elbow forming.  After closing the lower die and the upper die, promote according to the pipe between the inner die and the outer die of the pendulum rod.  Clearance movement is the whole process of mold making.  

Cold push elbow machine has the advantages of beautiful design, symmetrical wall thickness and small specification error.  They are usually used in the production of stainless steel tubes (especially thick-walled stainless steel tubes).  High precision inside and outside mold shell.  

The company mainly according to the requirements of customers to design and manufacture customers need elbow machine equipment, welcome customers who need to order elbow machine equipment to visit the company to negotiate orders!