金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Flow before elbow machine operation

Flow before elbow machine operation

Before using the elbow machine, the operator must do the following process:

Elbow machine must do power detection before operation, beyond the specified position of the power supply voltage can not be started operation, it is necessary to unplug the outlet beyond the power supply, control the power supply, our company in the mold of the old elbow machine and the oil cylinder feeding system of the whole machine for testing, after everything is normal. The startup operation is being performed.

The mold adjustment of the elbow machine, in the process of mold safety, the mold clamp block needs to be adjusted to the center, the clamp block can be adjusted with bolts, push the block in the mold, push the block can be adjusted, the core head and the mold should be selected in accordance with the center, loosen the core frame bolt, tighten the bolt after adjusting the center.

The solenoid relief valve worn by the elbow machine needs to be adjusted in the pressure test to ensure that the system pressure reaches the required working pressure, which is generally not higher than 12.5mpa.

Who order the company production of bend machine adopts PLC control system, when push system elbow pipe bend machine need to check the email whether the oil level reaches the oil level line, come on each lubrication point, open the bend machine to confirm motor, check the oil pump for abnormal sound, check whether there is a leak after start the machine hydraulic system can not play in the machine and play.

Bending machine manufacturers mainly produce a variety of different pipe equipment such as: bending machine, bending machine, tee machine, press, beveling machine, straightening machine and other above pipe equipment mold. Our company sincerely manufacture and service for you, your satisfaction is our good evaluation.