金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Heating method of elbow pushing machine

Heating method of elbow pushing machine

Elbow push machine composition: main engine, hydraulic pump station, control console, motor control cabinet, IF power supply, compensation capacitor, water cable, IF coil mediation frame, reactor. The cut raw material is set on the core rod of the elbow mould, and the IF induction wire is placed in the end of the core head of the elbow mould. The cooling water pump and IF power supply are started to heat the raw material to about 800C, and then the pushing machine is started to push the elbow.

According to the size of the push elbow to choose the main push pump, the selected rate of feeding, gate gate, mandre heated to the temperature of the thing began to push, things in the push speed adjustable, push to the middle point push machine active stop, hydraulic gate gate died, core rod feeding, release the gate retreat to the end of the gate gate to the rod diameter began to push. Note: The main pump can be used at the same time, usually only one environment can be used. It can also be used as a retreat without stopping. Retreat pumps can not be used at the same time, only one can be started, the other standby. Feeding pump can only be used when feeding. The stable pressure of the hydraulic system of the main oil pump is set as, and the control pressure of the hydraulic system of the attached cylinder is set as. Push machine travel is equipped with travel switch at both ends, the actual travel should be less than the larger travel, that is, the movement of the push plate before and after the two ends from the reality of the remaining allowance, so as to avoid the cylinder piston running to the end.

Elbow push system for short elbow machine, main effect is a high production efficiency, can according to customer's requirements in the production of production of various types of elbow pipe fittings, our company according to the customer's requirements in the production of manufacturing various types of pipe fittings equipment mainly includes: elbow machine, tee machine, expanding machine, pressing machine, groove machine, adjustable direct, etc. Welcome your consultation!