金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The name of the elbow machine

The name of the elbow machine

The company produces elbow machine, elbow machine is divided into two kinds of one is the middle frequency elbow machine, the other is the cold push elbow machine, in the name of elbow machine, push machine, cold push machine, cold push elbow machine, IF elbow machine, hydraulic elbow machine, elbow push machine, IF push machine and so on. Mainly according to the name of the customer and the need to manufacture satisfactory recognition of elbow machine equipment.

Elbow machine manufacturers produced elbow machine quality assurance, reasonable price, elbow machine export all over the world, the satisfaction of users around the world recognition.

Elbow machine driving device: hydraulic press (elbow correction), elbow correction mold, elbow correction mold, elbow beveling machine, steel tube saw machine, high temperature lubricant (graphite) spraying equipment on the inner wall of steel tube.

The elbow machine moves forward, heating, expanding and bending as it moves. The deformation characteristic of the hot push elbow is to determine the diameter of the billet according to the rule that the volume of the metal material is constant before and after plastic deformation. The diameter of most billets is smaller than the diameter of the elbow. The deformation process of the billet is controlled by the core die. It is a flow of compressed metal in the inner arc that compensates for other parts that become thinner due to radial expansion, thus obtaining uniformity.

Elbow machine main engine, hydraulic pump station, operation table, motor control cabinet, IF power supply, compensation capacitor, water cable, IF coil adjusting frame, reactor.

Elbow pushing machine mainly produces elbow pipe fittings. According to the elbow that needs to be pushed, select the main push pump, select the speed feed, heat the gate and mandrel to the working temperature, and start pushing. The pushing speed can be adjusted during work. When the elbow press reaches the end of the push, it will stop automatically. The hydraulic gate is shut down, the core rod is fed, the gate is released and backs up to the end point, and the gate begins to advance to the outer diameter of the rod. Our company mainly produces elbow pushing machine, cold drawing three-way machine elbow expanding machine and other pipe fitting equipment. All equipment can be manufactured according to customer requirements.