金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Economic benefits of pipe bender

Economic benefits of pipe bender

The induction principle of the pipe bender is that the working principle of the pipe bender is to use the medium frequency power supply to heat the steel pipe, while making the steel pipe heating speed, so that part of the steel pipe walks along the predetermined track, forming the curvature radius and Angle of bending. After the first pipe is installed in place, the bending radius of the rotary device is adjusted through the rocker arm guide screw drive device. The IF induction heating coil is heated to a certain temperature, and the pipe is bent with hydraulic pressure as the power. The car will pipe forward, platform four waist wheel clamp the pipe, along the bending radius to adjust the heating deformation and bending deformation of the steel pipe, cooling water, so as to obtain the required pipe fitting. If induction heating pipe bender to prevent the heating pipe is elliptic, steel pipe deformation before heating.

The technology of pipe bender: The raw steel pipe used in the bending pipe of this equipment is seamless steel pipe, straight seam welded pipe or spiral welded pipe. The bending radius of the bend must be greater than 2.5D (the bending radius below 2.5D is manufactured by elbow pushing process), and the programming can automatically control the bend Angle (the bend Angle can be set arbitrarily in a certain range according to the need). Push bending pipe diameter and wall thickness range: diameter φ89 ~ 1420mm, wall thickness: φ5 ~ 120mm (section design and manufacture of the equipment). Master cylinder stroke is based on the larger diameter of the bend and the larger bending radius (provided by the customer).

Pipe bending machine equipment of structure: frame rails and the main cylinder and the plate, pushing plate, pipe clamp device, bend the rocker, rocker arm, rocker arm, an axle shaft, bend combination clamp plate, medium frequency transformer adjusting device, frequency transformer, intermediate frequency power supply, automatic control system, back and forth work station (touch screen), cooling water system, etc.

Pipe bending machine manufacturers mainly according to the customer only ordered model and material to make satisfied and approved pipe bending equipment, transport to the customer only designated location, Aiguang pipe fitting equipment Co., LTD. Welcome to the world's users consultation.