金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

What is the main function of the elbow machine?

What is the main function of the elbow machine?

Elbow head and bed reinforcement design, annealed to eliminate internal stress, overall strength and stiffness enough to prevent deformation. Drive shaft directly inserted into the upper head, accurate installation, easy maintenance, bend the spindle and sprocket and the overall forging, the whole processing, the rolling of the whole tooth, keyless connection, force uniform, driven by two cylinder, pipe bending process, the turning arm close to the hydraulic system of automatic throttle buffer before bending angles, greatly improve the bending precision, fast restoration, throttling cushion close to the beginning, Greatly improve the reset accuracy and efficiency. Fully hydraulic drive, the microcomputer controller can be preset 16 angles, the elbow machine foot switch can be used to complete the whole process, hydraulic clamping, hydraulic materials, hydraulic elbow, hydraulic core-pulling, five cylinders (can increase the car feeding and space Angle function).

Elbow machine elbow pipe fittings classification introduction:

Carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon-leg, PVC, PPR, RFPP(add polypropylene) and so on.

According to the production method can be divided into pushing, pressing, forging, casting and so on.

According to manufacturing standards, it can be divided into national standard, electrical standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.

According to its radius of curvature, it can be divided into long radius elbow and short radius elbow. Long radius elbow means that the radius of curvature of the pipe is equal to 1.5 times the outer diameter, namely R=1.5D. Short radius elbow means that its radius of curvature is equal to the outside diameter of the pipe, namely R=1.0D. (D elbow diameter, R radius of curvature).

Installation process of elbow machine:

Installation: 1. Pull out elbow machine clamping die fixed mandrel. 2. Put the clamping die into the elbow machine, and then insert the fixed mandrel.

To adjust: 1. Fix and relax the clamping die base of the pipe bender, then put the control panel into manual mode and press the clamping button until the end of clamping die path. (At this time, the gap between the wheel die clamping die needs to be adjusted, clamping die seat can be adjusted by adjusting screws.