金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The operation flow of the three-way machine

The operation flow of the three-way machine

The operation process of three-way machine

1. Put the tube embryo into the mold.

2. The slider drives the upper die and presses down, and finally closes and releases the die.

3. The two plungers move forward and flush water into the tube embryo.

4. The two side cylinders continue to advance synchronously, and extrude the embryo tube. The supercharger injects high pressure liquid (such as water) into the embryo tube, and the pressure of the hydraulic press at this time can reach the attainable pressure. At the same time upsetting extrusion and water bulging type tube embryo. If according to the customer's requirements, can be made under the top cylinder, to support the pipe fitting and the top function and with its rise and fall.

5. If the pressure is over pressure, the hydraulic pressure will relieve automatically within a certain time.

Upsetting extrusion process is deforming under pressure of three or more directions, which can improve the plasticity of metal forming.

Three-way machine is water expansion equipment, water expansion technology, water expansion machinery used by the role of the working medium is not only to transfer pressure, but also to feed and feed characteristics, three-way machine is a three-beam and four-column structure to make each component can operate smoothly, to ensure its sensitivity and life.

The main working medium of the three-way machine is to seek truth from facts: the pressure medium is white emulsified water, easy to flow heat fast, to provide the transmission efficiency of the medium. After swelling, the water can be used back and forth, and can be operated for a long time without deterioration. Can prevent corrosion, no pollution. Easy to seal. Good lubrication performance in the swelling process. The water swelling machine uses water as the working medium, adding emulsifying powder into ordinary water to become emulsion, and using water to reduce losses in the working process. In this case, the lubricity and corrosion resistance of emulsified water can be closer to the oil medium liquid. It doesn't burn well, and it's pretty cheap.