金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

How does the customer make the elbow machine run smoothly

How does the customer make the elbow machine run smoothly

This series of elbow machine is mainly used for carbon steel, stainless steel elbow cold push forming is also used for seamless steel pipe push elbow common equipment, can be customized according to user requirements. Medium. Small hydraulic push elbow molding machine.

The whole structure of the elbow machine: the push machine is composed of the main machine, the heating coil bracket, the hydraulic system and the electrical system. The main machine adopts welding structure, the heating coil bracket adopts profile welding, and the hydraulic system adopts integrated control mode to realize the smooth operation. Electrical system components choose excellent products.

Elbow machine is mainly the main equipment for the production of elbow, which can produce 21-1620mm, 3-120mm wall thickness, multiple of 1D carbon steel, alloy steel elbow elbow machine is our company's traditional products of pipe fitting equipment, mainly used for the production of curvature radius 1-2.5D of various diameters and wall thickness of the elbow pipe. With the company's technology research and development of steel pipe equipment, intermediate frequency elbow machine has been improved by new technology. The intermediate frequency elbow machine is installed with double control platform, and a number of automatic operation technologies such as the hydraulic clamping of raw steel pipe are added. The elbow machine produces hydraulic pushing equipment such as the four-cylinder extra-thick elbow pipe fitting pushing machine accordingly. If the IF frequency power supply system is configured, it can realize one person operation control operation, energy saving, smooth operation and other functions.

Elbow machine mainly includes: Strip base (1), oil cylinder (2), oil cylinder support (3), rear baffle (4), movable push plate (5), front baffle (6), etc., a guide pipe (7) is movably connected to the center hole between the front baffle (6) and rear baffle (4). The inner side of the front baffle (6) is provided with a roller box (8). The outer side of the front baffle (6) is fixed vertically with a rocker arm base (9), rocker arm base (9) is provided with a movable axis (10), the movable axis (10) is connected with a rocker arm (11) with an adjustable length, and the front end of the rocker arm (11) is connected with a chuck (12) opposite the center hole.

Elbow machine is a pipe fitting processing equipment which can not only slow bend the pipe fittings but also push the pipe fittings. It is convenient to operate and reduce the cost.

Repair and maintenance of elbow machine equipment: check the fasteners of each part of the elbow machine to make the elbow machine in a tight state. The hydraulic pump station of the elbow machine is equipped with rubber sealing ring. If the sealing ring is damaged and leaking oil, it should be replaced in real time. If it is found that the progress and retreat of the elbow machine failure, the first check whether the solenoid valve action such as normal solenoid valve action. If there is a card to the phenomenon, open with gasoline or diesel cleaning, reinstall it. The elbow machine cleans the tank and filters the hydraulic oil once within 1-2 months after use. When cleaning the tank, the inlet filter of each pump should be cleaned. The above is a brief introduction to the repair and maintenance of the elbow machine.

Elbow machine equipment is the most basic pipe fitting equipment of our company, elbow machine is the use of medium frequency induction high temperature push elbow, this heating method is strong continuity, fast production efficiency, suitable for large-scale elbow production.