金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow machine function in what special place

Elbow machine function in what special place

The elbow machine produced by the company is mainly one of the main equipment for the production of elbow pipe fittings. The pipe fittings produced by the elbow machine are mainly used in petroleum, chemical industry. The elbow pipe fittings produced by the elbow machine of our company are used at the connecting and turning place in the pipeline. The use of the above introduced process is mainly high production efficiency and low cost, etc.

Elbow machine according to the need to produce the type and wall thickness of the elbow pipe to determine the mold and model of the elbow machine and wear the cylinder, etc. Combining with the process characteristics and difficulties of medium frequency induction heating pushing small and medium-sized stainless steel seamless elbow, the thermal strength problem of forming core die in the process of medium frequency induction heating pushing was solved by designing suitable hollow core die to keep the inner wall of the core die in a low temperature area.

The operation process before the use of the elbow machine: the elbow machine needs to be tested before the use of the following: First, the elbow machine clamping die fixed mandrel, the elbow machine clamping die into the clamping die fixed mandrel. Adjusting the mo base of the positive screw is the mo seal in the wheel die. When installing the back button, Jiamo back, clockwise rotation clamping die adjustment screw balance 1/2-1/4 circle. Mainly the nuts that hold the fixture in place.

The elbow pipe fittings equipment produced by elbow machine manufacturers is mainly divided into elbow machine host, hydraulic pump station, console, motor control cabinet, intermediate frequency power supply, compensation capacitor, water cable, intermediate frequency coil regulating frame, reactor, mold, etc. Through the elbow machine, put the cut raw material on the core rod of the elbow mold, put the intermediate frequency induction coil on the end of the core rod of the elbow mold, start the cooling and intermediate frequency power supply, heat the raw material to a certain degree, and then start the elbow machine to promote the elbow pipe products ordered by customers.

The company mainly for each need elbow machine equipment users to make satisfactory recognition of equipment. Obtain the cooperation between customers and the company.