金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow machine is the benefit of producing elbow pipe fitting

Function of elbow machine: The main function is to produce complete models of elbow pipe fittings, can be mass production and processing elbow pipe fittings, elbow forming function to meet the quality requirements of elbow pipe fittings. For the development efficiency in recent years, the elbow machine has brought effective benefits to customers who produce elbow pipe products! Elbow machine production elbow pipe fittings classification: carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon, PVC, PPR, RFPP(add polypropylene) and so on.

According to the production method can be divided into pushing, pressing, forging, casting and so on. According to manufacturing standards can be divided into national standard, electrical standard, ship standard, chemical standard, water standard, American standard, German standard, Japanese standard, Russian standard and so on.

According to its curvature radius, it can be divided into long radius elbow and short radius elbow. Long radius elbow refers to the radius of curvature of the pipe is equal to 1.5 times the outer diameter, that is, R=1.5D. Short radius elbow means that the radius of curvature is equal to the outside diameter of the pipe, that is, R=1.0D. (D elbow diameter, R curvature radius).

The elbow machine is divided into several installation methods: Installation: pull out the elbow machine clamping die fixed mandrel. Put the elbow machine clamping die in and insert the fixed mandrel. Adjustment: Fix and relax the clamping die seat of the bender, then put the control panel into manual mode and press the clamping button until the clamping die path is over. At this time, the gap between the clamping dies of the wheel die is required, and the clamping die seat can be adjusted by adjusting the screw. Adjust the clamping seat adjusting screw so that the clamping die is completely tight to the wheel die. Press the release button to retract the clamping die, then turn the clamping die adjusting screw clockwise about 1/2-1/4 turns. . Lock the clamping die holder retaining nut.

Introduction to the working principle of the elbow machine: put the cut raw materials on the core rod of the elbow mold, put the intermediate frequency induction coil on the core end of the elbow mold, start the cooling pump and the intermediate frequency power supply, heat the raw materials to about 800°C, and then start the push machine to push the bending. The bending machine is made of seamless steel pipe, welded steel pipe or spiral pipe as raw materials, using intermediate frequency heating, adjustable power and frequency, to ensure the appropriate heat transfer height, to ensure the stability of product material performance, intermediate frequency power factor above 0.95, energy saving, novel equipment, compact structure, automatic operation, high production efficiency. The use of hydraulic cylinder to promote raw materials, strong thrust, stepless transmission, automatic control, can greatly save manpower and material resources, with low construction investment, high yield, strong applicability of raw material specifications and other advantages.

Introduction to the operation procedures of the elbow machine: select the main push pump of the elbow pipe fitting of the push machine according to the needs of customers, feed according to the speed selected by the push elbow, heat the gate mandrel to the working temperature and start to push, adjust the push speed during work, push the machine automatically stops when pushed to the middle point, hydraulic gate locks the core rod, feed, loosen the gate and step back to the end point, and the gate outer diameter 5mm starts to push everywhere.

Elbow machine transmission spindle is directly inserted into the upper part of the head, accurate installation, easy maintenance, elbow spindle and drive sprocket overall casting, overall processing, overall rolling teeth, keyless connection, average force, driven by two cylinders, during the elbow process, the rotor close to the bending set Angle before the hydraulic system automatic throttle buffer, greatly improve the bending accuracy, fast reset, The return process is close to the start of the throttle buffer, which greatly improves the reset accuracy and work efficiency. Full hydraulic drive. The microcomputer controller can be preset to 16 angles, and the whole process can be completed by the foot switch of the elbow propeller. The role of the elbow machine is to play a major role in the production process of pipe fittings. Bend machines can produce a variety of bends from different models, materials and angles. Elbow machine production of materials are: stainless steel, alloy steel, carbon steel and so on. The pushing Angle of the elbow machine is produced according to the requirements of customers. After the elbow, our elbow machine mainly uses hydraulic cylinder and advanced medium frequency power supply. We will wear energy saving and noise free medium frequency power supply according to customer requirements. Elbow pipe fittings produced by elbow push machine are suitable for elbow installation in pipeline construction.

Bend machine manufacturers according to the model and material provided by customers to manufacture customer satisfaction approved pipe equipment. Welcome the need of user consultation order!

Pay attention to the relevant knowledge of elbow machine, welcome to pay attention to our website: http://www.xhxhhsl.com/

?