金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

High frequency pipe bender operation process

High frequency pipe bending machine is a kind of machine equipment commonly used in sheet metal processing, which is widely used in construction, automobile, furniture and other industries. The operation process of the pipe bending machine is simple, but it requires certain skills and experience. The following will be a detailed introduction from the preparation of the pipe bender, machine operation and pipe pretreatment three aspects.

First, prepare the pipe bending machine. Place the high-frequency pipe bender on a flat ground and fix it. Check the power supply of the pipe bender to ensure that the power supply is on and the voltage is stable. Then determine the pipe bending mold installed on the pipe bender, and prepare the pipe to be processed. Note that the material and size of the pipe need to match the bending mold. Finally, the machine lubrication and maintenance work to ensure the stable and flexible operation of the bending machine.

Next, the operation of the pipe bender is carried out. First, the pipe to be processed is placed in the feed position of the pipe bender. Then, start the power switch of the bending machine, and select the operation through the control panel of the bending machine, such as setting the bending Angle, bending radius and other parameters. Ensure that the selected parameters match the pipe to be machined. Next, the bending test operation is performed, the tube is placed on the mold, and the machine is started to see if the tube can meet the required bending radius and Angle. If there is a problem, you can adjust the parameters or replace the appropriate mold to achieve the desired effect. Finally, after determining that the test bending effect meets the requirements, a large number of processing operations are started, and the pipes are successively sent to the pipe bending machine for processing.

Finally, the pipe pretreatment was carried out. Before bending the pipe, some processing of the pipe is required. First, the tube is cut to the required length. Then, the two ends of the pipe are serrated so that they can be fixed on the pipe bender for processing. At the same time, the outer surface of the pipe is cleaned to ensure that the surface is smooth and free of oil and other impurities. Finally, to prevent the deformation of the pipe into the treatment, the use of fixtures or bearings and other tools to fix the pipe, to avoid the deformation or irregular bending of the pipe during the bending process.

In summary, the operation process of the high-frequency pipe bender is simple, but attention needs to be paid to the preparation work, operation and pipe pretreatment of the machine. As long as we pay attention to these details, the operation of the pipe bender can be more efficient and accurate tube processing.

The bending machine manufacturer completes the production of the bending equipment ordered by the customer within 60 days, and is transported to the place designated by the customer for installation and debugging after the satisfaction and approval of the customer.

For more information about high-frequency pipe bending machine, please pay attention to our website:http://www.xhxhhsl.com/