金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

How to install the pipe bender correctly

How to install the pipe bender correctly

Installing a pipe bender is a rather critical task that requires careful consideration and execution. The following is a general step-by-step guide to ensure that the pipe bender is installed correctly without any problems.

Step 1: Prepare

First, you need to prepare some materials and tools, including installation drawings, screws, nuts, lubricants, tool boxes, power drills, etc.

Step two: Assemble

1. Assemble the parts of the pipe bender according to the installation drawings provided by the manufacturer.

2. Check that all screws and nuts are fastened to ensure the stability and safety of the machine.

Step 3: Place the bracket

Place the bracket on the ground and use bolts to secure it.

Step 4: Install the motor

1. Install the motor bracket and fix it to the bracket of the pipe bender using screws or screws.

2. Install the motor on the motor support, and then fasten it with screws.

3. Connect cables to the motor, controller, and pipe bender.

Step 5: Install the oil pump

1. Install the oil pump and fix it on the machine.

2. Connect each part of the oil pump and the pipe bender.

3. Lubricating oil should be added during installation to ensure the smooth operation and life of the machine.

Step 6: Adjust and test

1. Ensure that all components are installed and secured.

2. Check whether all screws and nuts need to be tightened.

3. Check whether the motor and controller are correctly connected. Make corrections if necessary.

4. Carbon wire rotation test. Start the machine and adjust the position and Angle of each part by manual action.

5. Test the working effect of the machine and make necessary adjustments.

6. Clean the machine comprehensively and apply lubricating oil to ensure the long-term maintenance of the machine.

The hydraulic oil circuit of the pipe bender: check the oil level of the mailbox on time every week, the oil level is lower than the oil window should be added hydraulic oil, the pipe bender needs to change the oil in time when working to a certain time, and clean the oil tank. The hydraulic parts of the pipe bender should be changed every time the filter, so as to ensure that the oil of the pipe bender and the air filter on the oil tank are replaced once a year.

Maintenance of the pipe bender: The pipe bender needs to be maintained once in 45 days, which can extend the service life of the pipe bender.

These are the basic steps for installing a pipe bender, but please note that the installation steps may vary depending on the type of pipe bender you are purchasing. The process of installing a pipe bender needs to be very careful, it is better to be carried out by technicians and follow the recommendations and guidelines of the machine manufacturer.

For more knowledge about pipe bending machine, please pay attention to our website:http://www.xhxhhsl.com/