金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Medium frequency pipe bender oil leakage repair

Medium frequency pipe bending machine is a common metal processing equipment, which is used for bending metal pipes. However, due to long-term use and wear, the medium frequency pipe bender may have oil leakage problems. The oil leakage will not affect the normal operation of the equipment, and may cause other problems. Therefore, it is very important to repair the oil leakage problem of the medium frequency pipe bender in time.

First of all, we need to understand the lubrication system of the medium frequency pipe bender. Medium frequency pipe bender usually adopts hydraulic system to achieve pipe bending operation, the system includes fuel tank, hydraulic pump, pressure valve, hydraulic cylinder and other components. Oil leakage problems are usually caused by the following aspects:

1. Seal wear: The seals in the medium frequency pipe bending machine will wear during long-term use, resulting in a decline in the sealing performance of the hydraulic system, resulting in oil leakage. In the maintenance of the medium frequency pipe bending machine, the first need to check the hydraulic system seals, such as seals, O-rings, etc., if found wear or aging, should be replaced in time.

2. Loose tubing connection: there are many tubing connection points in the hydraulic system of the medium frequency pipe bender, and if these connection points are loose, it will lead to hydraulic oil leakage. When maintaining the medium frequency pipe bender, it is necessary to check the tubing connection point to ensure that the connection is firm, and if it is loose, it should be tightened in time.

3. Oil seal wear: The hydraulic oil seal plays a sealing role in the hydraulic cylinder and hydraulic pump of the medium frequency pipe bending machine. Prolonged use will lead to oil seal wear, resulting in oil leakage problems. When repairing the medium frequency pipe bender, it is necessary to check the oil seal in the hydraulic system, and replace it in time if it is found to be worn.

4. Oil pump seal failure: the hydraulic pump of the medium frequency pipe bender is responsible for providing the pressure of hydraulic oil, and if the seal of the hydraulic pump fails, it will lead to hydraulic oil leakage. When repairing the medium frequency pipe bender, it is necessary to check the sealing condition of the hydraulic pump, and repair or replace it in time if the loss of effect is found.

When repairing the oil leakage problem of the medium frequency pipe bender, the following points need to be noted:

1. Safety: In the maintenance process, you need to pay attention to the stability of the equipment. First, make sure the device is shut down and unplug it to prevent accidents. Second, wear personal protective equipment, such as gloves, glasses, etc., to stop injuries.

2. Cleaning: In the maintenance process, it is necessary to keep the working area clean to avoid dust and debris entering the equipment, affecting the maintenance effect.

3. Maintenance records: During the maintenance process, the steps and results of maintenance should be recorded in time for future reference and inquiry.

In short, the oil leakage problem of the medium frequency pipe bender needs timely maintenance to ensure the normal operation of the equipment. By checking the seals, tubing connection points, oil seals and oil pump seals, you can find out the cause of the oil leakage problem, and take appropriate repair measures. At the same time, the maintenance process needs to pay attention to stability and cleaning, and do a good job of maintenance records, in order to facilitate future maintenance and management.

For more information about medium frequency pipe bending machine, please pay attention to our website: http://www.xhxhhsl.com/