金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Medium frequency pipe bending machine should pay attention t

Medium frequency pipe bending machine is a kind of equipment used for processing metal pipes and pipe fittings, and special attention needs to be paid to stability and operating procedures during operation to ensure work efficiency and work quality. The following is the operation matters that should be paid attention to in the use of medium frequency pipe bending machine, detailed as follows:

1. Preparation before operation

1. Before using the medium frequency pipe bender, it is necessary to ensure that the power connection of the equipment is correct, the lubrication system is normal, and all safety devices are complete and effective.

2. Check whether the material and size of the pipe meet the requirements, and choose the appropriate mold and bending Angle.

3. Check whether the oil of the lubrication system is enough, whether the lubrication point is clean, and if necessary, lubricating oil should be added.

4. Check the working environment around the equipment to ensure sufficient space, good ventilation, and no debris hindering operation.

Second, precautions during operation

1. The operator should be familiar with the operation manual of the equipment, understand the structure and working principle of the equipment, and operate in accordance with the operating procedures.

2. The operator should wear good labor protective equipment, such as safety hats, goggles, gloves, etc., to ensure personal safety.

3. During operation, do not wear gloves, long-sleeved clothes and other items that are easily caught by the machine to avoid danger.

4. The operator should keep a clear mind and should not operate the equipment under the influence of fatigue, alcohol or drugs.

5. During the operation of the equipment, keep focused and do not leave the work at will to avoid accidents.

6. When the device is abnormal, stop the operation in time, locate the fault cause, and continue the operation after the fault is rectified.

7. During the operation, do not arbitrarily change the working parameters of the equipment, such as bending Angle, bending speed, etc., so as not to affect the processing quality.

8. The operator should master the position and use of the emergency stop button of the equipment in order to stop the equipment in time in an emergency.

3. Cleaning and maintenance after operation

1. After the operation is complete, power off the device, clean up the debris around the device, and keep the working environment clean.

2. Carry out regular maintenance of the equipment, such as cleaning the surface of the equipment, lubricating the lubrication point, checking the electrical circuit, etc.

3. Check and maintain the equipment regularly, such as checking the tightness of the transmission chain, checking the liquid level of the hydraulic system, etc., to ensure the normal operation of the equipment.

4. Regular inspection and replacement of the mold and fixture of the equipment to ensure processing quality and accuracy.

5. When the equipment is out of use for a long time, anti-rust treatment should be carried out to protect the surface of the equipment from corrosion.

To sum up, when using the medium frequency pipe bender, it is necessary to pay attention to stability, operate in strict accordance with the operating procedures, and clean and maintain the equipment in time to ensure the normal operation and processing quality of the equipment. I hope you found the above helpful.