金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

The use range of the beveling machine and the use of the bev

The use range of the beveling machine and the use of the beveling machine

This machine tool is suitable for power station, petroleum, chemical, shipbuilding and other industries of pipe fitting manufacturing, pipeline installation units use;It is the key equipment for pipe fitting making and pipe end groove processing before welding in pipeline construction.

This machine can make up different jig, can process Φ820-Φ1020 straight pipe and elbow pipe end groove;The cutter head is equipped with an Angle tool rest to process medium and high pressure pipes with wall thickness greater than 14 mm, and a floating tool rest to process low pressure pipes with wall thickness less than 16 mm and lost in 5 mm.After adjusting the position of the Angle tool rest according to different pipe diameters, the cutting process is carried out by the differential transmission structure.The clamping device adopts platform structure and flexible clamping which can expand the processing range and reduce the deformation of pipe fitting.Pipe alignment adopts the method of moving the power head around manually and lifting the fixture platform up and down.The electric machine is operated by centralized operation on the operating box, which is convenient and reliable.

The machine consists of power head, cutter head structure, bed structure, fixture platform structure, electrical control system and other five components.

The power head of the beveling machine: the power head outputs the six speed of the spindle and three kinds of differential tool rest feed speed by the motor through the gear change;The tail is also equipped with a tool holder electric fast advance and retreat structure, which can be used alone or at the same time with differential feed.

The cutter head structure of the beveling machine: the cutter head can be installed with the Angle tool rest, and the corresponding position of the tool rest should be adjusted according to the size of the pipe diameter before cutting. The Angle tool rest is driven by the differential speed to cut.

The bed structure of the bevel machine: the bed body is equipped with electric longitudinal feed structure, manual transverse cutting structure, bed body and dragging board components. The electric longitudinal feed has two kinds of speed: fast and labor. The two kinds of speed can work together independently or simultaneously in the same direction or in reverse.

Fixture platform structure: platform and electric lifting structure are installed on the fixture seat frame. There are longitudinal and transverse T-grooves on the platform for installing pipe fitting support and flexible clamping structure.

Electrical control system: electrical components are installed in the common electrical box, operating components are installed in the suspension type control box, the movement of the machine can be operated on the control box

Single-head beveling machine: designed as an improved double-head automatic beveling machine with power of 15 kW motor.Workbench for rotary worktable, put two lower die workbench, lock cylinder on the slide seat put an upper die, then put to the groove of the elbow in one of the lower die, began after processing to a speed adjusted the groove, double groove machine have to fast forward, after the electricity to processing into work automatically into the groove, groove processing after the automatic return,Automatically stop when it is in place (place an elbow in the other die while machining the groove).After the upper die is opened, the rotating table has to rotate 180° on the mold and start to slope another elbow. At this time, take down the slope good elbow and put another elbow, which can be used back and forth.Groove speed is 1.5 times faster than without rotating table.The track adopts Taiwan imported linear track, with close, reduce vibration, slope out of the elbow without ripple, the beveling machine is equipped with a group of floating knives, but also can put six tool car compound beveling and inner beveling.

Cangzhou Aoguang Machinery Equipment Co., Ltd. not only produces beveling machine, but also produces elbow machine, pipe bender, pipe expanding machine, press, and other mechanical equipment molds.

2284-2278.