金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow push machine overall introduction

Elbow push machine overall introduction

Application: seamless steel pipe, straight seam welded steel pipe and spiral welded steel pipe.

1, the elbow specification range is: outside diameter: Φ25mm ~ Φ1420mm;Wall thickness: 5mm ~ 120mm;(Design and manufacture the equipment in stages)

2. Angle: 22.5°, 45°, 90°, 135° and any Angle required by users;

3. The radius of curvature of the elbow is 1D ~ 2.5D

4, according to the need to push a variety of curvature radius of the bending steel pipe, also known as the unequal diameter bend pipe.

Unit 2, elbow push system structure: equipment frame rails and the main cylinder and the plate, activities before pushing plate, plate, feeding device, intermediate frequency coil adjustment device (intermediate frequency heating coil, bend mold, mold rod), intermediate frequency power supply heating equipment, electrical control system, hydraulic control system, work station (touch screen), cooling water circulation system, etc.

3. Auxiliary equipment of elbow pushing machine: hydraulic press (elbow shaping and whole mouth use), elbow shaping mold, elbow whole mouth mold, elbow beveling machine, steel pipe sawing machine, high-temperature lubricant (graphite) spraying equipment on the inner wall of steel pipe.

Elbow push-making machine is a traditional product of pipeline equipment factory, mainly used to produce various diameter and wall thickness of elbow pipe fittings with radius of curvature of 1 ~ 2.5D.With the development of deep processing technology of steel pipe, the product has been improved in all directions.The equipment has integrated ultra-short stress line cone die diameter expansion, digital control medium frequency induction heating, the application of no back pressure energy consumption hydraulic transmission and other technologies.All gate opening and closing adopt solenoid reversing valve, realize the double control of gate site and operation table, at the same time increase the raw material steel pipe hydraulic clamp and other automatic operation technologies, and combined with the factory's hot pipe expanding machine technology, the corresponding production of four cylinder extra-large and extra-thick elbow pipe pushing machine and other hydraulic pushing equipment.After the equipment is equipped with the intelligent thermostatic control system of medium frequency power supply heating, it can realize the operation and control of multiple devices by one person, energy saving and environmental protection, safe operation and other functions.

The clamping die of the pull-out elbow machine fixes the centering shaft.

Put the clamping die in the elbow machine, and then insert the fixed mandrel.

Adjustment: 1. Fix and relax the clamping die seat of the pipe bender, then put the control panel in manual mode, press the clamping button to the end of the clamping die path.There needs to be a gap between the wheel mould and the clamping mould, which can be adjusted by adjusting the clamping mould seat screw.

2. Adjust the clamping mold seat and the adjusting screw to make the clamping mold and the wheel mold completely close.

3. Press the back button to make the clamping die back, and then rotate the clamping die adjusting screw clockwise for 1-4 turns.

4. Then fix the nut lock of the clamping die seat

The above introduction of the installation and debugging process of the elbow machine, I hope to provide you with convenience, if you have other needs we can provide you with more information, please contact us.

2050-2042.