金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Power system of new type pipe bender

Power system of new type pipe bender

The new type of pipe bender has the advantages of better precision, high safety performance and simple operation. The new type of pipe bender uses the controller to control the electric push rod, and the electric push rod drives a connecting rod mechanism connected with the lead screw, so that the lead screw rotates, so that the blade bracket moves and meets the requirements of the knife edge clearance.The tool gap adjustment device of the new type pipe bender is better.The knife edge holder of the new type pipe bender is equipped with a moving adjustment device.The tool edge clearance adjustment device of the new type pipe bender is connected with a lead screw on the upper tool edge bracket, and is also provided with a controller, which is connected with a driving device, the driving device is connected with a tool edge clearance adjustment mechanism, and the tool edge clearance adjustment mechanism is connected with the lead screw.

The power system of the new type of pipe bender is composed of motor and reducer. It has two working states, fast advance and retreat, respectively driven by alternating current motor and frequency conversion motor.The pipe bender is installed with frequency conversion motor, which mainly provides the power of the pipe bender.The AC motor of the new type pipe bender is controlled by brake and electromagnetic clutch.Pipe bender includes gear set, chain, guide rail, etc.The tail seat of the pipe bender comprises a car body, a clamping head, a motor, a lead screw mechanism and a supporting wheel mechanism. The tail seat of the pipe bender moves forward and backward under the drive of the chain.The motor drive clamp holds the tube end tightly.

The use method of bending pipe produced by bending equipment

1. Usage:

(1) Refer to the operation manual of electric oil pump.

(2) first screw the working cylinder into the internal thread of the square block, so that the rear end of the cylinder is mounted on the wheel on the bracket downward.

(3), choose according to bend the pipe by the outer diameter of the die set in column fortress, two roller groove which corresponds to die, and then in the corresponding size of the plate hole, then the cover plate, the curved pipe inserted into the slot, then quick joint activities of high pressure oil pipe end part of the back and set on the joint of working cylinder, to the oil drain screw tightening on the electric pump,You can bend the pipe.When the bend is finished, loosen the oil drain screw and the plunger will reset automatically.

2. Precautions:

(1) Refer to the operation manual of electric oil pump.

(2) do not unload the quick connector when there is a load.

(3) The machine is oil as the medium, the oil and the machine must do a good job of cleaning and maintenance, in order to avoid blockage or oil leakage, affect the use effect.

2048-2047.