金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Elbow machine and push machine simple maintenance and mainte

Elbow machine and push machine simple maintenance and maintenance

Elbow machine, hydraulic push machine maintenance and maintenance:

Elbow machine, hydraulic push machine under normal circumstances, should be maintained in a month or so.

The elbow machine checks the fasteners at all parts to make them in a tight state.The joints of each part of the hydraulic pump station of the elbow machine are equipped with oil-resistant rubber sealing rings.If the sealing ring is damaged or leaking oil, it should be replaced in time.

If it is found that the forward and backward failure of the elbow machine, first check whether the solenoid valve acts, such as the solenoid valve acts normally, check whether the overflow valve or the one-way valve is stuck with impurities, open it with gasoline or diesel oil and clean it, and then reinstall it.

Clean the oil tank and filter the hydraulic oil tank once within 1-2 months after the elbow machine starts to use.When cleaning the tank, the oil filter of each pump should be cleaned.

Cold push elbow machine for four cylinder push system and two cylinder push two, push more than 820*40 elbow, originally with four cylinder push.Four cylinder design push plate force is all.Compared with the two-cylinder large thrust cold push elbow machine, the design longitude is reasonable, and the manufacturing cost is reduced, which saves part of the purchase cost for the user.Four cylinder cold push elbow machine are designed for automatic feeding, automatic core bar adjustment, automatic inserting door, automatic gate, the operation is very convenient, the work efficiency is greatly improved.The clamping wheel is designed in front of the cold push elbow machine, and the rocker arm can be pushed into various large elbows.

Elbow pushing machine is the traditional product of Cangzhou Aocheng machinery and equipment, mainly used in the production of various elbow pipe fittings.According to different shapes and uses can be divided into: groove type elbow, sleeve type elbow, flange elbow, reducing elbow, stamping elbow, push elbow, butt welding elbow, inner wire elbow and so on.

Equipment range of elbow pushing machine: 21mm-1620mm, radius 1D, 1.5d,2D.Wall thickness of 3mm-120mm, material is: carbon steel, alloy steel, stainless steel.

1521-1508.