金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上,金年会 金字招牌诚信至上

Simple composition of intermediate frequency elbow machine

Simple composition of intermediate frequency elbow machine

The intermediate frequency elbow machine mainly includes: the main engine, the main cylinder support plate (including the main cylinder), the movable push plate, the front support plate, the semi-automatic feeding mechanism, the intermediate frequency coil adjustment frame (including the intermediate frequency heating coil), the intermediate frequency power supply, the electrical control system and so on.

Medium frequency elbow machine is used for the shaping of the elbow, the main power is the hydraulic cylinder, the heating method is medium frequency heating (in addition to the use of coal stove and natural gas heating) elbow diameter from 21mm-1620mm, wall thickness from 3mm-120mm.Medium frequency elbow machine is mainly used for carbon steel and alloy steel elbow forming, if you need stainless steel elbow products, please choose our company's cold push elbow machine.

The repair and maintenance of the elbow machine equipment: check the fasteners of all parts of the elbow machine, so that the elbow machine is in a fastening state.The hydraulic pump station parts of the elbow machine are all equipped with rubber sealing rings. If the sealing rings are damaged or leaked, they should be replaced in real time.If it is found that the progress and retreat of the elbow machine are out of order, first check whether the solenoid valve is acting normally as the solenoid valve is acting normally.If there is a card to the phenomenon, open with gasoline or diesel oil cleaning, reinstall can be.Elbow machine in 1-2 months after use, clean the oil tank and filter a hydraulic oil.When cleaning the tank, clean the oil inlet filter of each pump.The above is a brief introduction to the repair and maintenance of the elbow machine.

1502-1482.